The Books Have Arrived! Make Sure Your Address is Correct in BackerKit
19 days ago
– Wed, Apr 28, 2021 at 05:55:38 PM
Books Are Here!
Good news! The books have arrived, and they look great!
Now that the books are here, there are just a few things that need to happen before we start shipping them out.
First, if you haven’t filled out your BackerKit survey, please do so. I’m sending over a reminder email today to those who have not completed this step.
Once you fill out the survey, you’ll get a link to the campaign’s digital downloads in BackerKit if you haven’t gotten those yet. (I just sent out an email from BackerKit about the digital rewards to all those who have already filled out their surveys.)
PLEASE NOTE: If you used Apple Pay on Kickstarter and didn’t get a survey, it’s likely that your correct email address didn’t get forwarded to BackerKit. Please send me your correct email address through a message on Kickstarter or BackerKit and I’ll get that changed manually.
Second, most orders have been locked, but as surveys continue to roll in, I will continue to lock them.
Third, cards will be charged through BackerKit for add-ons and pre-orders on Thursday--this is for items that were added after the Kickstarter was over--so you should see those go through then.
Fourth (SUPER IMPORTANT!), on Thursday, you’ll see an email come through from BackerKit that will give you 48 hours to update your address. You can update it at any time before this, but after that email is sent and the 48 hours are up, the address will be locked, and this is the address your book will ship to. So make sure your address is correct there. Thank you!
Fifth, once addresses are locked, I will coordinate with the fulfillment team in order to schedule time for them to start shipping the books. If all goes well, books should start shipping out to you during the first two weeks of May.
Thank you again for being on this journey with me. I can’t wait for you to get your books soon!
Small Update: Still Waiting for Books
about 1 month ago
– Wed, Apr 14, 2021 at 08:35:28 PM
Thank you all so much for your patience as we're getting closer to the final lap of this Kickstarter. Right now we're doing one of the hardest parts: waiting. The books are printed and on a ship somewhere. When the Suez canal was blocked a few weeks ago, I kept thinking, "Wouldn't it be my luck if the books are on that ship?" I doubt that they are, but shipping has been slower than usual the whole world over, so we're in the middle of the waiting game, and I appreciate your patience. As soon as the books arrive, I will let you know.
In the meantime, let me share with you a little bit of what I've been doing when I have a few minutes of down time. I had some extra watercolor paper left over from creating all the Little Blue cosplays for the campaign, so I drew and colored some extra sketches to give to friends and family. Here's one of them. When the campaign is over and fulfilled, I'll post some of these extra sketches on Instagram.
Thank you again for your patience and for supporting the Kickstarter. I'll send more updates on the books as soon as I have them!
Verification Sample Received and Approved
3 months ago
– Tue, Feb 23, 2021 at 08:35:27 AM
Hello there! Welcome to the last week of February. I've got a small update on the Monsters Don't Wear Underpants Kickstarter I'd like to share with you.
I've received the verification sample of the book from the printer and have given it approval to finish the manufacturing process.
As you can see from the photo, the book looks great!
The dragon has been my go-to page for checking colors since it's got all those vibrant pinks. I'm really happy with how it's turned out. You can see here how the flaps will work. Those are big flaps, basically pages themselves!
In these photos, you can see the different steps taken to get to the final book. The far left is the mockup copy of the book that I put together to make sure I liked the look of the whole thing and that the flaps were working how I intended. It's not a very far cry from that to the final, front and center. The other two piles are the factory sample of printouts over top of a mockup book (center back) and the color proofs (far right).
What does approval of the verification sample mean? This is the last approval step before the printer can move forward and finish assembling the rest of the books prior to shipping them. Shipping time from the printer to me will still be probably around a month. Then we'll move into prepping them to go out in the mail to you. Still hoping on a May delivery! I'll keep you updated, though.
Thanks for being on this journey with me. We're getting closer to the time when you'll receive your own copies, and I can't wait for you to see how they've turned out. Have a wonderful remainder of February. Spring is right around the corner!
The Book is at the Printers
4 months ago
– Fri, Jan 22, 2021 at 05:30:03 PM
Happy New Year to all of you! Welcome to 2021. I hope it's treating you well and that you all had a great holiday season. It's been a bit since my last update because a lot of the little steps forward on the project didn't seem to warrant a whole email update blast, so I've saved up all those little steps to give you something with a bit more substance.
The Book is Being Printed
About a week ago, I received the book mockups and the color proofs. I did a thorough pass of each one, checking the color, double-checking how the flaps line up.
The printer has done a fantastic job! I approved everything, and so the project has moved to the next step, which is printing and Testing. Yes, Testing with a capital T. Since this is a book that's aimed primarily at children, certain ASTM International standards must be met for it to be sold in the U.S. (I'll admit this is something I wasn't aware of, but it's a step I'm happy to add.)
The book will be tested and will conform to the U.S. safety standards of ASTM F963-17, which adds a little bit of time to our timeline, but not so significant that the book is likely to be delayed.
Currently I should be getting a quality control copy of the book that I'll need to approve at the end of January or the beginning of February. Following that, there will be a few weeks for the Chinese New Year holiday followed by a few weeks of the Testing I mentioned above. I'll give final approval sometime in March with the expectation that--if all goes as planned--the books will arrive to me sometime in April. So far, it's looking like we'll be able to get the books to you all sometime in May, which is when we originally promised them during the campaign. If anything changes, I will let you know.
In the meantime, I've ordered and received the awesome stretch goal stickers!
Please note that since the books aren't being safety tested with the stickers attached, I will be sending the stickers unattached to the books. What you do with them is up to you, but please be aware that if you stick one to your book, the book will no longer completely conform to the U.S. safety standards of ASTM F963-17. Just a heads up!
For those of you who pledged for original sketches, I've been hard at work putting them together so that they'll be able to travel safely with the books when they arrive.
So, there's not a lot left to do except wait patiently and work through the Quality Assurance and Approvals process on the book itself. When they arrive, we'll put them all together and start getting them out to you all, hopefully sometime in May.
As always, I'm incredibly grateful to all of you for your support. This has been a fun project and a great learning experience. I can't wait for you to be able to hold the book in your hands and be able to read it with friends and loved ones. I hope it will continue to put smiles on your faces and help make the world just a bit better because of that.
Digital Downloads + Production Update
5 months ago
– Mon, Dec 07, 2020 at 08:17:26 PM
Happy December! Here's an update on Monsters Don't Wear Underpants.
First off, the digital rewards are ready to go. That's the 4-page printable coloring book PDF and the ebook of Monsters Don't Wear Underpants, which has both mobi and epub files. (Epub has a bit more functionality with how the flaps work, while mobi basically uses a page turn to simulate opening a flap.)
An email will come from BackerKit which will prompt you to log in to your BackerKit account. That's where you will find the links to download these two goodies.
The gold stickers have been ordered and are currently in the mail to me. We'll add this to the package containing your book(s) when the printed/finished books arrive. Speaking of which...
I've officially begun the process of working with the printer and have submitted what I hope are finished files to them on Friday. We're still in the early parts of this process. They'll take the files and create a mockup of the final book so they can correctly set up all the moving parts to produce the flaps, etc, exactly how we want them to work.
So, the book is moving along, and I'll send further updates as things continue to progress.
You might get tired of me thanking you for your help in making this book a reality, but please know that I do appreciate the part you've played in this. You are awesome. I hope your December is a happy one!